Mid-USA

• Cruise-Mate is an easy to use lever operated throttle assist.
• Once installed, Cruise-Mate is extremely reliable and easy to operate.
• To set the throttle, simply flip lever forward (towards front of bike); you can still turn throttle once Cruise-Mate is set.
• Flip lever back (toward rear of bike) and throttle returns to normal operation.
• When adjusted properly, the throttle does not lock completely and can be turned back to the closed position without touching the lever in the event of an emergency.
• It is not a cruise control and will not maintain speed when going uphill.
• All internal parts are made from Stainless Steel.
• Cruise-Mate is infinitely adjustable for proper tension in a few seconds.
• Lifetime Guarantee.

Ironbraid
Chrome Cruise Assist
Fits all Harley-Davidson^® Models 1996/Later (except 2014/Later Touring Models)
By: IRONBRAID INC

Custom Springer Rocker Studs Hardbody Wide Springers & Most Custom Wide Springers,Chrome
HARDBODY
Chrome Plated Rocker Studs (Set of 4)

Threaded diameter is 1/2"
Bearing surface 3/4"

Length of threaded part is 9/16”

Primary Cover Gasket,Outer St 1989/2006,Dyna 1991/2005 Rpls Hd 60539-94B

• Economically priced
• High quality for sure scaling
• Sold each

POWER HOUSE
iber with Silicone Bead
Primary Cover Gasket
Fits Softail 1989/2006 & Dyna 1991/2005
Replaces HD# 60539-94B

Performance Alternator Rotor Use With 38 Or 45 Amp Systems Rpls Hd 29999-97B & 29981-95
V-FACTOR
Standard Black Rotor
Fits Big Twin 1997/2005 with 38-45 Amp charging system
(Imported)

Cruisemate Installation Kit Use With 1982/L* W Throttle Cables Mfg# 9800

• Cruise-Mate is an easy to use lever operated throttle assist
• Once installed, Cruise-Mate is extremely reliable and easy to operate
• To set the throttle simply flip lever forward (towards front of bike); you can still turn throttle once Cruise-Mate is set
• lip lever back (toward rear of bike) and throttle returns to normal operation
• When adjusted properly the throttle does not lock completely and can be turned back to the closed position without touching the lever in the event of an emergency
• It is not a cruise control and will not maintain speed when going uphill
• All internal parts are made from Stainless Steel
• Cruise-Mate is infinitely adjustable for proper tension in a few seconds
• Lifetime Guarantee

Ironbraid
Install Kit for 1982/Later with dual throttle cables
Note: All 2008/Later Road Kings & 2015/Later Softail require Installation Kit 42135

HARDBODY

Spring Kit for Springer Forks Use with Most Custom Springers Inc Springs, Rods, Seats & Nuts

Custom Springer Top Stem Nut Use With Most Custom Springers Chrome Plated
HARDBODY
Chrome Plated Top Tree Stem Nut

Harley-Davidson Front Fork Tubes Flt/Flh 84/99 Stock Length Rpls Hd# 45827-84

• All fork slider tubes are centerless ground from seamless aircraft tubing in either show chrome (USA) or hard chrome (Import)
• All fork tubes are sold in pairs and include spring spacers

Hard Chrome Plated
Stock 20 7/8 Length Set fits FLT, FLTC, FLTCU, FLHT, FLHTC, FLHTCU, FLHS, FLHR 1986/1996 with or without air forks
Replaces HD# 45827-84
2 US Length Set fits LST, LSTC, LST, LSTN 1986/1999
Replaces HD# 45930-86

Air Filter Element Sportster 1988/2003 Rpls Hd# 29331-96

• Engineered for increased performance
• Washable and reusable high flow 4-layer cotton element increases air flow while offering unmatched filtration for long engine life
• Not only will these filters increase horsepower in stock engines, they are a must when performance upgrades have been done your motorcycle
• Sold each

V-FACTOR
Air ilter Element, 1 5/8 width
Fits Sportster 1988/2003
Replaces HD# 29331-96

• Cruise-Mate is an easy to use lever operated throttle assist.
• Once installed, Cruise-Mate is extremely reliable and easy to operate.
• To set the throttle, simply flip lever forward (towards front of bike); you can still turn throttle once Cruise-Mate is set.
• Flip lever back (toward rear of bike) and throttle returns to normal operation.
• When adjusted properly, the throttle does not lock completely and can be turned back to the closed position without touching the lever in the event of an emergency.
• It is not a cruise control and will not maintain speed when going uphill.
• All internal parts are made from Stainless Steel.
• Cruise-Mate is infinitely adjustable for proper tension in a few seconds.
• Lifetime Guarantee.

Ironbraid
Black Cruise Assist
Fits all Harley-Davidson^® Models 1996/Later (except 2014/Later Touring Models)
By: IRONBRAID INC

Springer Neck Stem Sleeve Cp Use With Most Custom Springers Sold Each
HARDBODY
Chrome Plated Neck Stem Sleeve (Sold Each)

Springer Shock Absorber, Chrome FXSTS 1988/2006 Replaces HD# 54483-88

• High quality OE replacement springer shock absorber
• Sold Each

V-FACTOR
Chrome Plated Shock Absorber
Fits XSTS 1988/2006
Replaces HD# 54483-88

Clutch Pushrod & Snap Rings For Use With #71204 Kit Repls Hd# 36818-03

V-FACTOR
Replacement Clutch Pushrod & Snap Rings
Replaces HD# 36818-03

Flat Rear Fender 7" Wide For Wide Tire Rigid Frame & Custom Use

• Designed with strength in mind, these one-piece HARDBODY rear fenders are cold rolled from 14 gauge steel
• They measure a full 48 in circumference and can be cut to your desired length
• enders are not drilled or relieved for the chain or drive belt
• See the frame and body section for fender supports

Raw Steel 7" wide flat fender
Fits Big Twin & Sportster Rigid frames

Starter Relay,Delco Remy Style Bt 67/E68,Sportster 65/73 Replaces Hd 71455-67C

• High quality Delco Remy style relay

V-FACTOR
Fits Big Twin 1967/Early 1968 & Sportster Late 1971/1974
Replaces HD# 71455-67C

Oil Tank Dipstick W/Tempgauge Sportster 2004/Later* Rpls Hd 63023-05

• Monitor your oil temperature with this chrome dipstick/temperature gauge
• Design of this dipstick provides a grip area for easy removal

V-FACTOR
Chrome Plated Dipstick
Fits Sportster models 2004/Later
Replaces HD# 63023-05

Lower External Spring Set Use With Custom Springers Sold In A Pair
HARDBODY
Chrome Plated Lower External Spring Set (Sold as Pair)

Debris Deflector, Stainless Fits Softail 2000/2007 Rpls Hd# 60476-00A

• Designed to help keep the road grime and debris off the oil tank, starter motor and transmission area
• These stainless steel debris reflectors replaces the OE black plastic one
• or ease of cleaning and flashy good looks, the oil tank side is semi-polished while the more focal wheel side is highly polished

HARDBODY
Stainless Steel Deflector
Fits Softail 2000/2007 & all HARDBODY Softail style rear forks
Replaces HD# 60476-00A

V-FACTOR

Chrome Plated 14" Axle, 3/4" Diameter(Imported)

Dimension A - 14"

Dimension B - 12-2/4"

Ignition Part,Condenser All Point Type Ignition W/O Magneto Rpls Hd 32726-30A
High quality ignition condensers meet or exceed OEM specifications.V-FACTOR
Fits all Points Type Ignition (except Magneto models)
Replaces HD# 32726-30A
(Imported)

Coil High Performance Rd 4 Ohm 12 Volt All Models 1965/1979 W/Mount Cp Rpls Hd 31609-65A
These high performance dual fire round coils produce 10% greater output capacity than stock and include a seat post type mount. The two 7mm copper core spark plug wires measure 23 long and can be cut to the desired length. The screw-on tower caps include rubber seals to keep any moisture out. V-FACTOR
Chrome Plated, 12 volt, 4 OHM
Fits Big Twin 1965/1979
Replaces HD# 31609-65A
(Imported)

Rocker Arm,Shims "010" Thick Shovelhead 66/Later Use To Set End Clearance Mfg #2253
HARDWARE
Rocker Arm Shim, .010 Thick
Fits Shovelhead all years
Package of 10

Oe Style Gas Cap Touring Models 1992/Later* Rpls Hd 61274-92

• OE style black plastic gas cap
• or use with Touring models with gas tank fuel doors
• Sold each

V-FACTOR
Black Plastic OE style Gas Cap
Fits Touring models 1992/Later
Replaces HD# 61274-92

Belt Dr Part Quiet Cl Friction BDL Sys Round Dog Dr Rr Pulley 7 Kevlar/Alum Disc Ercp-100
Designed to help quiet the rattle that is normally associated with open belt drives or closed belt drives with vented covers. Normally the friction plates are splined to the inner clutch hub, but the quiet clutch friction plates incorporate a round dog drive to the outer clutch basket. The friction plates are bonded to aluminum for light weight. See below for availability of plate material. Fits all Round Dog type BDL belt drives.
Clutch friction Plate Kit
Includes: 7 Kevlar® friction plates (.152 thick)

Brake Pads For Custom Caliper Fits Jaybrake J-Four Caliper Copper Sintered Material

• Copper sintered material for long life and quiet operation
• Economically priced
• See Additional Image for dimensions
• Sold in pairs

V-FACTOR
Copper Sintered Material Brake Pads
Fits Custom Calipers

Wheel,Bearing I.D. Reducer Stl 3/4" Axle,W/1"Id Ball Bearing 1" Id Bearing To 3/4" Id

• Reducers are designed to convert wheels with 1 I.D. sealed (ball type) bearings to a ³/₄ O.D. axle

HARDBODY
Stainless Steel Pair
(Imported)